2 Axle 60 Tons Lowboy Low Bed Semi Trailer (Heavy Machinery Transport)
The ENXIN 2-axle 60 tons lowboy low bed semi trailer is the optimized, cost-effective transport solution designed for moving mid-sized construction plant, crawler excavators, drilling rigs, and industrial transformers up to 60 tonnes.
By engineering a dedicated 2-axle configuration with high-capacity 13T/16T heavy-duty axles and high-tensile Q345B steel, this lowbed delivers maximum payload efficiency with fewer tires and lower tare weight, significantly reducing long-term tire replacement and maintenance expenses.
Key Engineering & Loading Features
- Low Working Platform for Overhead Clearance: Stepped drop-deck design with a low deck height (850mm–1,150mm unladen), providing critical vertical clearance under highway bridges, overhead power lines, and tunnels.
- High-Strength Main Beam & Crossmembers: Heavy-duty I-beam structure welded by automatic submerged arc processes. Heavy flange plates (18mm top / 20mm bottom / 14mm web) ensure no permanent frame bending when concentrated tracked excavators climb aboard.
- Heavy-Duty Loading Ramps: Standard heavy spring-assisted mechanical climbing ramps (or optional hydraulic folding ramps) with an approach angle ≤ 15°, allowing smooth driving of tracked machinery onto the rear deck without bottoming out.
- Reinforced Anti-Slip Platform Deck: 8mm high-friction checkered steel plate reinforced with heavy bottom crossmembers spaced every 300mm to prevent floor indentation under heavy tracks and iron wheels.
- Premium Running Gear & Braking: Genuine FUWA / BPW 13-Ton / 16-Ton axles, paired with heavy mechanical leaf spring suspension and WABCO RE-6 relay braking valves for reliable stopping power with heavy crawler loads.
Technical Specifications Matrix
| Specification Item | Standard 2-Axle 60T Configuration | Custom Heavy Duty Upgrade |
|---|---|---|
| Rated Loading Capacity | 40,000 kg – 60,000 kg | 60,000 kg – 70,000 kg (Reinforced Gooseneck) |
| Overall Dimensions (L×W×H) | 13,000 mm × 3,000 mm × 1,750 mm | Custom deck length & width extension brackets |
| Working Platform Height | 850 mm – 1,150 mm (Subject to tire choice) | Ultra-low concave deck configuration |
| Main Beam Material | Q345B High-Tensile Steel I-Beam | Q345B / T700 High-Strength Steel |
| Axles & Running Gear | 2 Axles × FUWA / BPW 13-Ton | 2 Axles × FUWA / BPW 16-Ton Heavy-Duty |
| Tires & Rims | 8 units 11.00R20 or 12R22.5 Tubeless | 235/75R17.5 / 315/80R22.5 Low Profile Tires |
| Climbing Ramps | Heavy spring-assisted mechanical ramps | Hydraulic folding ramps with power pack |
| Landing Gear & Kingpin | 28T Two-speed landing gear; 2" (50#) JOST Kingpin | 32T Landing gear; 3.5" (90#) Kingpin |
Buyer Decision Guide: 2 Axles vs 3 Axles
Not sure whether a 2-axle or 3-axle lowbed suits your machinery? Read our comprehensive engineering analysis:
- How to Choose a Lowbed Semi Trailer: Axles, Payload, and Gooseneck Explained
- Cameroon Client Factory Inspection for Lowbed Semi Trailers
Frequently Asked Questions (Lowbed Buyer FAQ)
Q: Can 2 axles safely carry a 30-ton excavator?
A: Yes, absolutely. A 2-axle lowbed with 13T or 16T FUWA axles is ideally suited for 20–35 ton excavators (such as CAT 320/330, Komatsu PC200/PC300, or SANY SY215). It offers lower tare weight and reduced fuel consumption compared to 3-axle builds.
Q: Are side outriggers / extension brackets available for wide loads?
A: Yes. We can equip the trailer with swing-out side outriggers (250mm–300mm on each side), widening the effective loading platform from 3,000mm up to 3,500mm for wide crawler equipment.
Q: How does the trailer arrive at the destination port?
A: We provide batch shipping optimization via RO-RO or bulk cargo vessels from Qingdao Port. All machined surfaces and electrical connections are thoroughly coated with anti-corrosion protective wax.
